mirror of
https://github.com/acmesh-official/acme.sh.git
synced 2025-07-02 06:02:46 +00:00
More white space/layout changes to please the engine :)
This commit is contained in:
stilez
GitHub
parent
5612019c0e
commit
9fdd77875f
@ -12,12 +12,10 @@
|
|||||||
# https://docs.plesk.com/en-US/12.5/api-rpc/about-xml-api.28709
|
# https://docs.plesk.com/en-US/12.5/api-rpc/about-xml-api.28709
|
||||||
# and more specifically: https://docs.plesk.com/en-US/12.5/api-rpc/reference.28784
|
# and more specifically: https://docs.plesk.com/en-US/12.5/api-rpc/reference.28784
|
||||||
|
|
||||||
|
|
||||||
# This may be needed if the DNS provider doesn't make the standard Plesk API available to a user.
|
# This may be needed if the DNS provider doesn't make the standard Plesk API available to a user.
|
||||||
# As a result, Plesk can't be configured using usual means or RFC1236. But the XML API is often
|
# As a result, Plesk can't be configured using usual means or RFC1236. But the XML API is often
|
||||||
# still left accessible, and is well documented, so it can be used instead, for acme.sh purposes.
|
# still left accessible, and is well documented, so it can be used instead, for acme.sh purposes.
|
||||||
|
|
||||||
|
|
||||||
# API NOTES:
|
# API NOTES:
|
||||||
|
|
||||||
# 1) The API uses a user/password combination. It should therefore require cURL over HTTPS
|
# 1) The API uses a user/password combination. It should therefore require cURL over HTTPS
|
||||||
@ -33,7 +31,6 @@
|
|||||||
# 3) The API references domains by a domain ID, when manipulating records. So the code must
|
# 3) The API references domains by a domain ID, when manipulating records. So the code must
|
||||||
# initially convert domain names (string) to Plesk domain IDs (numeric).
|
# initially convert domain names (string) to Plesk domain IDs (numeric).
|
||||||
|
|
||||||
|
|
||||||
# REQUIRED VARIABLES:
|
# REQUIRED VARIABLES:
|
||||||
|
|
||||||
# You need to provide the Plesk URI and login (username and password) as follows:
|
# You need to provide the Plesk URI and login (username and password) as follows:
|
||||||
@ -43,7 +40,6 @@
|
|||||||
# export pleskxml_user="johndoe"
|
# export pleskxml_user="johndoe"
|
||||||
# export pleskxml_pass="XXXXX"
|
# export pleskxml_pass="XXXXX"
|
||||||
|
|
||||||
|
|
||||||
# OPTIONAL VARIABLES:
|
# OPTIONAL VARIABLES:
|
||||||
|
|
||||||
# To use an insecure Plesk URI, set the following:
|
# To use an insecure Plesk URI, set the following:
|
||||||
@ -58,12 +54,11 @@
|
|||||||
# By design if DBG level is 9 for a message, it is ALWAYS shown, this is used for _info and _err
|
# By design if DBG level is 9 for a message, it is ALWAYS shown, this is used for _info and _err
|
||||||
# export pleskxml_debug_min_level=2
|
# export pleskxml_debug_min_level=2
|
||||||
|
|
||||||
|
|
||||||
############ Before anything else, define dedug functions to be sure they are detected even if while testing #####################
|
############ Before anything else, define dedug functions to be sure they are detected even if while testing #####################
|
||||||
|
|
||||||
_DBG_EARLY_CHECK_MODE() {
|
_DBG_EARLY_CHECK_MODE() {
|
||||||
|
|
||||||
if printf '%s' "${pleskxml_debug_min_level:-0}" | grep -qE '^[0-3]$' ; then
|
if printf '%s' "${pleskxml_debug_min_level:-0}" | grep -qE '^[0-3]$'; then
|
||||||
_pleskxml_DBG_LEVEL="${pleskxml_debug_min_level:-0}"
|
_pleskxml_DBG_LEVEL="${pleskxml_debug_min_level:-0}"
|
||||||
_pleskxml_DBG_COUNT=0
|
_pleskxml_DBG_COUNT=0
|
||||||
else
|
else
|
||||||
@ -72,46 +67,37 @@ _DBG_EARLY_CHECK_MODE() {
|
|||||||
fi
|
fi
|
||||||
|
|
||||||
_info "plesk XML running in debug mode. Debug level = '${_pleskxml_DBG_LEVEL}' "
|
_info "plesk XML running in debug mode. Debug level = '${_pleskxml_DBG_LEVEL}' "
|
||||||
# This won't display if DBG level was set to zero.
|
# This won't display if DBG level was set to zero.
|
||||||
}
|
}
|
||||||
|
|
||||||
# arg1 = severity level (1=least serious, 3=most serious)
|
# arg1 = severity level (1=least serious, 3=most serious)
|
||||||
# By design if DBG level is 9 for a MESSAGE, the message is ALWAYS shown, this is used for _info and _err
|
# By design if DBG level is 9 for a MESSAGE, the message is ALWAYS shown, this is used for _info and _err
|
||||||
# arg2 = message
|
# arg2 = message
|
||||||
_DBG() {
|
_DBG() {
|
||||||
if [ "$1" -eq 9 ] || ( [ "$_pleskxml_DBG_LEVEL" -gt 0 ] && [ "$1" -ge "$_pleskxml_DBG_LEVEL" ] ); then
|
if [ "$1" -eq 9 ] || ([ "$_pleskxml_DBG_LEVEL" -gt 0 ] && [ "$1" -ge "$_pleskxml_DBG_LEVEL" ]); then
|
||||||
case $1 in
|
case $1 in
|
||||||
1) _pleskxml_severity='INFO'
|
1) _pleskxml_severity='INFO' ;;
|
||||||
;;
|
2) _pleskxml_severity='WARN' ;;
|
||||||
2) _pleskxml_severity='WARN'
|
3) _pleskxml_severity='ERR' ;;
|
||||||
;;
|
9) _pleskxml_severity='_ACME.SH' ;;
|
||||||
3) _pleskxml_severity='ERR'
|
|
||||||
;;
|
|
||||||
9) _pleskxml_severity='_ACME.SH'
|
|
||||||
;;
|
|
||||||
esac
|
esac
|
||||||
_pleskxml_DBG_COUNT=$(( _pleskxml_DBG_COUNT + 1 ))
|
_pleskxml_DBG_COUNT=$((_pleskxml_DBG_COUNT + 1))
|
||||||
printf '%04d DEBUG [%s]:\n%s\n\n' "$_pleskxml_DBG_COUNT" "$_pleskxml_severity" "$2"
|
printf '%04d DEBUG [%s]:\n%s\n\n' "$_pleskxml_DBG_COUNT" "$_pleskxml_severity" "$2"
|
||||||
fi
|
fi
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
# arg1 = severity level (1=least serious, 3=most serious)
|
# arg1 = severity level (1=least serious, 3=most serious)
|
||||||
# arg2 = message (vardump will be appended)
|
# arg2 = message (vardump will be appended)
|
||||||
_DBG_VARDUMP() {
|
_DBG_VARDUMP() {
|
||||||
_DBG "$1" "$( printf '%s: 1st lines of current defined variables are now:\n%s\n\n' "${2:-NO_FURTHER_MSG}" "$( set | grep '_pleskxml' | sort )" )"
|
_DBG "$1" "$(printf '%s: 1st lines of current defined variables are now:\n%s\n\n' "${2:-NO_FURTHER_MSG}" "$(set | grep '_pleskxml' | sort)")"
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
_DBG_ERR_TRAP() {
|
_DBG_ERR_TRAP() {
|
||||||
echo "Error on line $1"
|
echo "Error on line $1"
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
############ Start of module itself ##############################
|
############ Start of module itself ##############################
|
||||||
|
|
||||||
|
|
||||||
# Trap errors and perform early check for debug mode.
|
# Trap errors and perform early check for debug mode.
|
||||||
# Traps currently ignored
|
# Traps currently ignored
|
||||||
|
|
||||||
@ -186,7 +172,7 @@ dns_pleskxml_add() {
|
|||||||
return 1
|
return 1
|
||||||
fi
|
fi
|
||||||
|
|
||||||
if [ "$_pleskxml_allow_insecure" ]; then
|
if [ "$_pleskxml_allow_insecure" ]; then
|
||||||
_info 'Plesk XML: You have allowed insecure http connections to Plesk. Passwords and logins may be sent in plain text.\nPlease do not use this setting unless very sure of security!'
|
_info 'Plesk XML: You have allowed insecure http connections to Plesk. Passwords and logins may be sent in plain text.\nPlease do not use this setting unless very sure of security!'
|
||||||
fi
|
fi
|
||||||
|
|
||||||
@ -197,12 +183,11 @@ dns_pleskxml_add() {
|
|||||||
|
|
||||||
_DBG 2 "Calling API to get domain ID for $_pleskxml_domain"
|
_DBG 2 "Calling API to get domain ID for $_pleskxml_domain"
|
||||||
|
|
||||||
_pleskxml_domain_id="$( _pleskxml_get_domain_ID "$_pleskxml_domain" )"
|
_pleskxml_domain_id="$(_pleskxml_get_domain_ID "$_pleskxml_domain")"
|
||||||
_pleskxml_retcode=$?
|
_pleskxml_retcode=$?
|
||||||
|
|
||||||
_DBG_VARDUMP 2 'Call has returned'
|
_DBG_VARDUMP 2 'Call has returned'
|
||||||
|
|
||||||
|
|
||||||
if [ $_pleskxml_retcode -ne 0 ] || [ "$_pleskxml_errors" != '' ] || [ "$_pleskxml_result" = '' ]; then
|
if [ $_pleskxml_retcode -ne 0 ] || [ "$_pleskxml_errors" != '' ] || [ "$_pleskxml_result" = '' ]; then
|
||||||
# Really, just testing return code should be enough, based on above code, but let's go "all-in" and test all variables returned
|
# Really, just testing return code should be enough, based on above code, but let's go "all-in" and test all variables returned
|
||||||
_err "$_pleskxml_errors"
|
_err "$_pleskxml_errors"
|
||||||
@ -237,8 +222,6 @@ dns_pleskxml_add() {
|
|||||||
return 0
|
return 0
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Usage: dns_pleskxml_rm _acme-challenge.domain.org "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
|
# Usage: dns_pleskxml_rm _acme-challenge.domain.org "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
|
||||||
# Remove a TXT record after validation
|
# Remove a TXT record after validation
|
||||||
|
|
||||||
@ -278,7 +261,7 @@ dns_pleskxml_rm() {
|
|||||||
|
|
||||||
_DBG 2 "Calling API to get domain ID for $_pleskxml_domain"
|
_DBG 2 "Calling API to get domain ID for $_pleskxml_domain"
|
||||||
|
|
||||||
_pleskxml_domain_id="$( _pleskxml_get_domain_ID "$_pleskxml_domain" )"
|
_pleskxml_domain_id="$(_pleskxml_get_domain_ID "$_pleskxml_domain")"
|
||||||
_pleskxml_retcode=$?
|
_pleskxml_retcode=$?
|
||||||
|
|
||||||
_DBG_VARDUMP 2 'Call has returned'
|
_DBG_VARDUMP 2 'Call has returned'
|
||||||
@ -318,7 +301,6 @@ dns_pleskxml_rm() {
|
|||||||
|
|
||||||
#################### Define private functions ##################################
|
#################### Define private functions ##################################
|
||||||
|
|
||||||
|
|
||||||
#################### Plesk related functions
|
#################### Plesk related functions
|
||||||
|
|
||||||
_pleskxml_get_variables() {
|
_pleskxml_get_variables() {
|
||||||
@ -335,8 +317,8 @@ _pleskxml_get_variables() {
|
|||||||
# At most the check can be removed. But it needs to be able to split out a host and a domain.
|
# At most the check can be removed. But it needs to be able to split out a host and a domain.
|
||||||
|
|
||||||
if printf '%s' "$_pleskxml_FQDN" | grep -iEq '^[^][/.:[:space:]^$*'\''"`-][^][/.:[:space:]^$*'\''"`]*(\.[^][/.:[:space:]^$*'\''"`_]+)+$'; then
|
if printf '%s' "$_pleskxml_FQDN" | grep -iEq '^[^][/.:[:space:]^$*'\''"`-][^][/.:[:space:]^$*'\''"`]*(\.[^][/.:[:space:]^$*'\''"`_]+)+$'; then
|
||||||
_pleskxml_host="$( printf '%s' "$_pleskxml_FQDN" | sed -E 's/^([^.]+)\..*$/\1/' )"
|
_pleskxml_host="$(printf '%s' "$_pleskxml_FQDN" | sed -E 's/^([^.]+)\..*$/\1/')"
|
||||||
_pleskxml_domain="$( printf '%s' "$_pleskxml_FQDN" | sed -E 's/^[^.]+\.(.*)$/\1/' )"
|
_pleskxml_domain="$(printf '%s' "$_pleskxml_FQDN" | sed -E 's/^[^.]+\.(.*)$/\1/')"
|
||||||
else
|
else
|
||||||
_pleskxml_errors="An invalid domain name (FQDN) was supplied."
|
_pleskxml_errors="An invalid domain name (FQDN) was supplied."
|
||||||
fi
|
fi
|
||||||
@ -354,7 +336,6 @@ _pleskxml_get_variables() {
|
|||||||
_pleskxml_uri_prefix_match='https://'
|
_pleskxml_uri_prefix_match='https://'
|
||||||
fi
|
fi
|
||||||
|
|
||||||
|
|
||||||
if printf '%s' "${pleskxml_uri:-}" | grep -qiE "^${_pleskxml_uri_prefix_match}"'([a-z0-9][a-z0-9.:-]*|\[[a-f0-9][a-f0-9.:]+\])(:[0-9]{1,5})?(/|$)'; then
|
if printf '%s' "${pleskxml_uri:-}" | grep -qiE "^${_pleskxml_uri_prefix_match}"'([a-z0-9][a-z0-9.:-]*|\[[a-f0-9][a-f0-9.:]+\])(:[0-9]{1,5})?(/|$)'; then
|
||||||
# URI is "valid enough" to use, and uses https if this is mandatory (= pleskxml_allow_insecure_uri wasn't set)
|
# URI is "valid enough" to use, and uses https if this is mandatory (= pleskxml_allow_insecure_uri wasn't set)
|
||||||
_pleskxml_uri="$pleskxml_uri"
|
_pleskxml_uri="$pleskxml_uri"
|
||||||
@ -390,15 +371,12 @@ _pleskxml_get_variables() {
|
|||||||
fi
|
fi
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Build a cURL request for the Plesk API
|
# Build a cURL request for the Plesk API
|
||||||
# ARGS:
|
# ARGS:
|
||||||
# First arg is a Plesk XML API template. Further args (up to 3 items) are substituted into it via printf
|
# First arg is a Plesk XML API template. Further args (up to 3 items) are substituted into it via printf
|
||||||
|
|
||||||
_pleskxml_api_request() {
|
_pleskxml_api_request() {
|
||||||
|
|
||||||
|
|
||||||
_DBG 2 "Entered _pleskxml_api_request($*), to make an XML request.${_pleskxml_newline} arg1=^$1^${_pleskxml_newline} arg2=^$2^${_pleskxml_newline} arg3=^$3^${_pleskxml_newline} arg4=^$4^"
|
_DBG 2 "Entered _pleskxml_api_request($*), to make an XML request.${_pleskxml_newline} arg1=^$1^${_pleskxml_newline} arg2=^$2^${_pleskxml_newline} arg3=^$3^${_pleskxml_newline} arg4=^$4^"
|
||||||
|
|
||||||
_pleskxml_errors=''
|
_pleskxml_errors=''
|
||||||
@ -417,12 +395,12 @@ _pleskxml_api_request() {
|
|||||||
|
|
||||||
# Sanitise user+pw for single quote enclosure, ands build Plesk arg string
|
# Sanitise user+pw for single quote enclosure, ands build Plesk arg string
|
||||||
|
|
||||||
_pleskxml_user="$( printf '%s' "$_pleskxml_user" | sed "s/'/'\\''/g" )"
|
_pleskxml_user="$(printf '%s' "$_pleskxml_user" | sed "s/'/'\\''/g")"
|
||||||
_pleskxml_pass="$( printf '%s' "$_pleskxml_pass" | sed "s/'/'\\''/g" )"
|
_pleskxml_pass="$(printf '%s' "$_pleskxml_pass" | sed "s/'/'\\''/g")"
|
||||||
_pleskxml_APICMD="$( printf "$1 %0.0s%0.0s%0.0s" "$2" "$3" "$4" )"
|
_pleskxml_APICMD="$(printf "$1 %0.0s%0.0s%0.0s" "$2" "$3" "$4")"
|
||||||
# Add some %0.0s at the end of the format string in the 1st arg, to cope with ("absorb") variable number of further args
|
# Add some %0.0s at the end of the format string in the 1st arg, to cope with ("absorb") variable number of further args
|
||||||
# otherwise this will repeat the format string which we don't want.
|
# otherwise this will repeat the format string which we don't want.
|
||||||
# If there weren't additional args, these will evaluate to empty strings/blank, and be harmless.
|
# If there weren't additional args, these will evaluate to empty strings/blank, and be harmless.
|
||||||
|
|
||||||
_pleskxml_curlargs="--anyauth \
|
_pleskxml_curlargs="--anyauth \
|
||||||
-X POST \
|
-X POST \
|
||||||
@ -435,13 +413,13 @@ _pleskxml_api_request() {
|
|||||||
|
|
||||||
_DBG_VARDUMP 2 'About to call Plesk via cURL'
|
_DBG_VARDUMP 2 'About to call Plesk via cURL'
|
||||||
|
|
||||||
_DBG 2 "$( printf 'cURL command: %s %s %s' "$_pleskxml_curlpath" "$_pleskxml_curlargs" "$_pleskxml_uri" )"
|
_DBG 2 "$(printf 'cURL command: %s %s %s' "$_pleskxml_curlpath" "$_pleskxml_curlargs" "$_pleskxml_uri")"
|
||||||
_pleskxml_prettyprint_result="$( eval "$_pleskxml_curlpath" "$_pleskxml_curlargs" "$_pleskxml_uri" 2>/dev/null )"
|
_pleskxml_prettyprint_result="$(eval "$_pleskxml_curlpath" "$_pleskxml_curlargs" "$_pleskxml_uri" 2>/dev/null)"
|
||||||
_pleskxml_retcode="$?"
|
_pleskxml_retcode="$?"
|
||||||
_DBG 1 "_pleskxml_prettyprint_result =${_pleskxml_newline}'$_pleskxml_prettyprint_result' "
|
_DBG 1 "_pleskxml_prettyprint_result =${_pleskxml_newline}'$_pleskxml_prettyprint_result' "
|
||||||
_DBG 2 "retcode = $_pleskxml_retcode"
|
_DBG 2 "retcode = $_pleskxml_retcode"
|
||||||
|
|
||||||
# BUGFIX TO CHECK - WILL RETCODE FROM cURL BE AVAILABLE HERE?
|
# BUGFIX TO CHECK - WILL RETCODE FROM cURL BE AVAILABLE HERE?
|
||||||
|
|
||||||
# Abort if cURL failed
|
# Abort if cURL failed
|
||||||
|
|
||||||
@ -453,16 +431,16 @@ _pleskxml_api_request() {
|
|||||||
|
|
||||||
# OK. Next, check XML reply was OK. Start by pushing it into one line, with leading/trailing space trimmed.
|
# OK. Next, check XML reply was OK. Start by pushing it into one line, with leading/trailing space trimmed.
|
||||||
|
|
||||||
# _pleskxml_result="$( printf '%s' "$_pleskxml_prettyprint_result" | \
|
# _pleskxml_result="$( printf '%s' "$_pleskxml_prettyprint_result" | \
|
||||||
# awk '{$1=$1};1' | \
|
# awk '{$1=$1};1' | \
|
||||||
# tr -d '\n' \
|
# tr -d '\n' \
|
||||||
# )"
|
# )"
|
||||||
|
|
||||||
|
_pleskxml_result="$(printf '%s' "$_pleskxml_prettyprint_result" \
|
||||||
|
| sed -E 's/(^[[:space:]]+|[[:space:]]+$)//g' \
|
||||||
|
| tr -d '\n'
|
||||||
|
)"
|
||||||
|
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_prettyprint_result" | \
|
|
||||||
sed -E 's/(^[[:space:]]+|[[:space:]]+$)//g' | \
|
|
||||||
tr -d '\n' \
|
|
||||||
)"
|
|
||||||
|
|
||||||
_DBG_VARDUMP 2 'cURL succeeded, valid cURL response obtained'
|
_DBG_VARDUMP 2 'cURL succeeded, valid cURL response obtained'
|
||||||
|
|
||||||
# Now we need to check item by item if it's OK.
|
# Now we need to check item by item if it's OK.
|
||||||
@ -479,9 +457,9 @@ _pleskxml_api_request() {
|
|||||||
return 1
|
return 1
|
||||||
else
|
else
|
||||||
# So far so good. Strip the <?xml> and <packet>...</packet> tags and continue
|
# So far so good. Strip the <?xml> and <packet>...</packet> tags and continue
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed -E 's/^<\?xml version[^>]+><packet version[^>]+>(.*)<\/packet>$/\1/' \
|
| sed -E 's/^<\?xml version[^>]+><packet version[^>]+>(.*)<\/packet>$/\1/'
|
||||||
)"
|
)"
|
||||||
fi
|
fi
|
||||||
|
|
||||||
_DBG 2 "Checking <system> tags don't exist..."
|
_DBG 2 "Checking <system> tags don't exist..."
|
||||||
@ -489,7 +467,6 @@ _pleskxml_api_request() {
|
|||||||
# <system> section found anywhere in response?
|
# <system> section found anywhere in response?
|
||||||
# This usually means some kind of basic API error such as login failure, bad XML request, etc
|
# This usually means some kind of basic API error such as login failure, bad XML request, etc
|
||||||
|
|
||||||
|
|
||||||
if printf '%s' "$_pleskxml_result" | grep -qiE '<system>.*</system>'; then
|
if printf '%s' "$_pleskxml_result" | grep -qiE '<system>.*</system>'; then
|
||||||
# Error - shouldn't contain <system>...</system>. Abort
|
# Error - shouldn't contain <system>...</system>. Abort
|
||||||
_pleskxml_errors='Error when querying Plesk XML API. The result contained a <system> tag.\nThis usually indicates an invalid login, badly formatted API request or other error. The response was:\n'"$_pleskxml_prettyprint_result"'\n'
|
_pleskxml_errors='Error when querying Plesk XML API. The result contained a <system> tag.\nThis usually indicates an invalid login, badly formatted API request or other error. The response was:\n'"$_pleskxml_prettyprint_result"'\n'
|
||||||
@ -497,10 +474,8 @@ _pleskxml_api_request() {
|
|||||||
return 1
|
return 1
|
||||||
fi
|
fi
|
||||||
|
|
||||||
|
|
||||||
_DBG 2 'Checking 1 or >=1 <result> tag (or tags) found, each containing 'status:ok'...'
|
_DBG 2 'Checking 1 or >=1 <result> tag (or tags) found, each containing 'status:ok'...'
|
||||||
|
|
||||||
|
|
||||||
# Check results section. Most commands only have one results section.
|
# Check results section. Most commands only have one results section.
|
||||||
# But some (i.e., get all DNS records for a domain) have many results sections,
|
# But some (i.e., get all DNS records for a domain) have many results sections,
|
||||||
# and we will need to check each <results>...</results> section separately.
|
# and we will need to check each <results>...</results> section separately.
|
||||||
@ -520,15 +495,15 @@ _pleskxml_api_request() {
|
|||||||
|
|
||||||
_DBG 2 'Found at least 1 <result> section. Splitting each result section to a separate line'
|
_DBG 2 'Found at least 1 <result> section. Splitting each result section to a separate line'
|
||||||
|
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed "s/<result>/\\${_pleskxml_newline}<result>/g" | \
|
| sed "s/<result>/\\${_pleskxml_newline}<result>/g" \
|
||||||
sed "s/<\/result>/<\/result>\\${_pleskxml_newline}/g" | \
|
| sed "s/<\/result>/<\/result>\\${_pleskxml_newline}/g" \
|
||||||
grep '<result>' \
|
| grep '<result>'
|
||||||
)"
|
)"
|
||||||
|
|
||||||
# Detect and abort if there are >1 <result> sections and we're ponly expecting 1 section.
|
# Detect and abort if there are >1 <result> sections and we're ponly expecting 1 section.
|
||||||
|
|
||||||
_pleskxml_linecount=$( printf '%s\n' "$_pleskxml_result" | wc -l )
|
_pleskxml_linecount=$(printf '%s\n' "$_pleskxml_result" | wc -l)
|
||||||
|
|
||||||
_DBG 2 "Result is: '$_pleskxml_result' (${_pleskxml_linecount} line(s))"
|
_DBG 2 "Result is: '$_pleskxml_result' (${_pleskxml_linecount} line(s))"
|
||||||
|
|
||||||
@ -551,8 +526,7 @@ _pleskxml_api_request() {
|
|||||||
# _pleskxml_line *should* contain a single result section.
|
# _pleskxml_line *should* contain a single result section.
|
||||||
# Check this is correct.
|
# Check this is correct.
|
||||||
|
|
||||||
|
# _DBG "Checking a <result> section... content is ${_pleskxml_line}"
|
||||||
# _DBG "Checking a <result> section... content is ${_pleskxml_line}"
|
|
||||||
|
|
||||||
if printf '%s' "$_pleskxml_line" | grep -qiEv '^<result>.*</result>$'; then
|
if printf '%s' "$_pleskxml_line" | grep -qiEv '^<result>.*</result>$'; then
|
||||||
# Error - doesn't contain <result>...</result>. Abort
|
# Error - doesn't contain <result>...</result>. Abort
|
||||||
@ -562,7 +536,7 @@ _pleskxml_api_request() {
|
|||||||
|
|
||||||
# Now strip the <results> tag and check there is precisely one <status> section and its ciontents are "ok"
|
# Now strip the <results> tag and check there is precisely one <status> section and its ciontents are "ok"
|
||||||
|
|
||||||
_pleskxml_line="$( printf '%s' "$_pleskxml_line" | sed -E 's/^<result>(.*)<\/result>$/\1/' )"
|
_pleskxml_line="$(printf '%s' "$_pleskxml_line" | sed -E 's/^<result>(.*)<\/result>$/\1/')"
|
||||||
|
|
||||||
if printf '%s' "$_pleskxml_line" | grep -qiEv '<status>.*</status>'; then
|
if printf '%s' "$_pleskxml_line" | grep -qiEv '<status>.*</status>'; then
|
||||||
# Error - doesn't contain <status>...</status>. Abort
|
# Error - doesn't contain <status>...</status>. Abort
|
||||||
@ -581,9 +555,9 @@ _pleskxml_api_request() {
|
|||||||
return 1
|
return 1
|
||||||
fi
|
fi
|
||||||
|
|
||||||
# _DBG "Line is OK. Looping to next line or exiting..."
|
# _DBG "Line is OK. Looping to next line or exiting..."
|
||||||
|
|
||||||
done << EOL
|
done <<EOL
|
||||||
$_pleskxml_result
|
$_pleskxml_result
|
||||||
EOL
|
EOL
|
||||||
|
|
||||||
@ -591,17 +565,17 @@ EOL
|
|||||||
|
|
||||||
_DBG 2 "All results lines had status:ok. Exiting loop, and removing all <status>ok</status> tags now they've been checked"
|
_DBG 2 "All results lines had status:ok. Exiting loop, and removing all <status>ok</status> tags now they've been checked"
|
||||||
|
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed -E 's/<status>ok<\/status>//g' \
|
| sed -E 's/<status>ok<\/status>//g'
|
||||||
)"
|
)"
|
||||||
|
|
||||||
# Result is OK. Remove any redundant self-closing tags, and <data> or </data> tags, and exit
|
# Result is OK. Remove any redundant self-closing tags, and <data> or </data> tags, and exit
|
||||||
|
|
||||||
_DBG 2 'Now removing any self-closing tags, or <data>...</data> tags'
|
_DBG 2 'Now removing any self-closing tags, or <data>...</data> tags'
|
||||||
|
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed -E 's/(<[a-zA-Z0-9._-]+[[:space:]]*\/>|<\/?data\/?>)//g' \
|
| sed -E 's/(<[a-zA-Z0-9._-]+[[:space:]]*\/>|<\/?data\/?>)//g'
|
||||||
)"
|
)"
|
||||||
|
|
||||||
_DBG 2 "About to exit API function. Result = ${_pleskxml_newline}'${_pleskxml_result}' "
|
_DBG 2 "About to exit API function. Result = ${_pleskxml_newline}'${_pleskxml_result}' "
|
||||||
|
|
||||||
@ -611,9 +585,6 @@ EOL
|
|||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
_pleskxml_get_domain_ID() {
|
_pleskxml_get_domain_ID() {
|
||||||
|
|
||||||
_DBG 2 "Entered Plesk get_domain_ID($*), to get the domain's Plesk ID."
|
_DBG 2 "Entered Plesk get_domain_ID($*), to get the domain's Plesk ID."
|
||||||
@ -624,7 +595,7 @@ _pleskxml_get_domain_ID() {
|
|||||||
|
|
||||||
_pleskxml_api_request "$_pleskxml_tplt_get_domain_id" "$1"
|
_pleskxml_api_request "$_pleskxml_tplt_get_domain_id" "$1"
|
||||||
_pleskxml_retcode=$?
|
_pleskxml_retcode=$?
|
||||||
# $1 is the domain name we wish to convert to a Plesk domain ID
|
# $1 is the domain name we wish to convert to a Plesk domain ID
|
||||||
|
|
||||||
_DBG 2 'Returned from API request, now back in get_domain_ID()'
|
_DBG 2 'Returned from API request, now back in get_domain_ID()'
|
||||||
|
|
||||||
@ -652,9 +623,9 @@ _pleskxml_get_domain_ID() {
|
|||||||
return 1
|
return 1
|
||||||
else
|
else
|
||||||
# So far so good. Remove the <result>...</result> section and continue
|
# So far so good. Remove the <result>...</result> section and continue
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed -E 's/(^<result>|<\/result>$)//g' \
|
| sed -E 's/(^<result>|<\/result>$)//g'
|
||||||
)"
|
)"
|
||||||
fi
|
fi
|
||||||
|
|
||||||
# Result should contain precisely one <filter-id> section, containing the domain name inquired.
|
# Result should contain precisely one <filter-id> section, containing the domain name inquired.
|
||||||
@ -673,9 +644,9 @@ _pleskxml_get_domain_ID() {
|
|||||||
return 1
|
return 1
|
||||||
else
|
else
|
||||||
# So far so good. Remove the <filter-id>...</filter-id> section and continue
|
# So far so good. Remove the <filter-id>...</filter-id> section and continue
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed "s/<filter-id>$1<\/filter-id>//" \
|
| sed "s/<filter-id>$1<\/filter-id>//"
|
||||||
)"
|
)"
|
||||||
fi
|
fi
|
||||||
|
|
||||||
# All that should be left is one section, containing <id>DOMAIN_ID</id>
|
# All that should be left is one section, containing <id>DOMAIN_ID</id>
|
||||||
@ -691,9 +662,9 @@ _pleskxml_get_domain_ID() {
|
|||||||
|
|
||||||
# SUCCESS! Remove the surrounding <id> tag and return the value!
|
# SUCCESS! Remove the surrounding <id> tag and return the value!
|
||||||
|
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed -E 's/^<id>([0-9]+)<\/id>$/\1/' \
|
| sed -E 's/^<id>([0-9]+)<\/id>$/\1/'
|
||||||
)"
|
)"
|
||||||
|
|
||||||
_DBG_VARDUMP 2 'SUCCESSFULLY exiting Plesk get_domain_ID'
|
_DBG_VARDUMP 2 'SUCCESSFULLY exiting Plesk get_domain_ID'
|
||||||
|
|
||||||
@ -701,7 +672,6 @@ _pleskxml_get_domain_ID() {
|
|||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
# 1st arg is the domain ID
|
# 1st arg is the domain ID
|
||||||
# 2nd arg (optional) is the TYPE of arg(s) to keep
|
# 2nd arg (optional) is the TYPE of arg(s) to keep
|
||||||
# format = valid regex WITHOUT ^ or $, such as TXT, or (A|AAAA|CNAME)
|
# format = valid regex WITHOUT ^ or $, such as TXT, or (A|AAAA|CNAME)
|
||||||
@ -716,11 +686,10 @@ _pleskxml_get_dns_records() {
|
|||||||
|
|
||||||
_pleskxml_api_request "$_pleskxml_tplt_get_dns_records" "$1"
|
_pleskxml_api_request "$_pleskxml_tplt_get_dns_records" "$1"
|
||||||
_pleskxml_retcode=$?
|
_pleskxml_retcode=$?
|
||||||
# $1 is the Plesk internal domain ID for the domain
|
# $1 is the Plesk internal domain ID for the domain
|
||||||
|
|
||||||
_DBG 2 'Returned from API request, now back in get_txt_records()'
|
_DBG 2 'Returned from API request, now back in get_txt_records()'
|
||||||
|
|
||||||
|
|
||||||
if [ $_pleskxml_retcode -ne 0 ] || [ "$_pleskxml_errors" != '' ] || [ "$_pleskxml_result" = '' ]; then
|
if [ $_pleskxml_retcode -ne 0 ] || [ "$_pleskxml_errors" != '' ] || [ "$_pleskxml_result" = '' ]; then
|
||||||
# Really, just testing return code should be enough, based on above code, but let's go "all-in" and test all variables returned
|
# Really, just testing return code should be enough, based on above code, but let's go "all-in" and test all variables returned
|
||||||
_DBG 2 "$_pleskxml_errors"
|
_DBG 2 "$_pleskxml_errors"
|
||||||
@ -733,9 +702,9 @@ _pleskxml_get_dns_records() {
|
|||||||
_DBG 2 "Full DNS records were:${_pleskxml_newline}${_pleskxml_newline}'${_pleskxml_result}' "
|
_DBG 2 "Full DNS records were:${_pleskxml_newline}${_pleskxml_newline}'${_pleskxml_result}' "
|
||||||
|
|
||||||
if [ -n "${2:-}" ]; then
|
if [ -n "${2:-}" ]; then
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
grep "<type>$2</type>" \
|
| grep "<type>$2</type>"
|
||||||
)"
|
)"
|
||||||
_DBG 2 "Filtered relevant DNS records. Records to be returned are:${_pleskxml_newline}${_pleskxml_newline}'${_pleskxml_result}' "
|
_DBG 2 "Filtered relevant DNS records. Records to be returned are:${_pleskxml_newline}${_pleskxml_newline}'${_pleskxml_result}' "
|
||||||
else
|
else
|
||||||
_DBG 2 'Not filtering DNS records. All records will be returned.'
|
_DBG 2 'Not filtering DNS records. All records will be returned.'
|
||||||
@ -745,8 +714,6 @@ _pleskxml_get_dns_records() {
|
|||||||
return 0
|
return 0
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
_pleskxml_add_txt_record() {
|
_pleskxml_add_txt_record() {
|
||||||
|
|
||||||
_DBG 2 "Entered Plesk _pleskxml_add_txt_record($*)"
|
_DBG 2 "Entered Plesk _pleskxml_add_txt_record($*)"
|
||||||
@ -756,9 +723,9 @@ _pleskxml_add_txt_record() {
|
|||||||
_pleskxml_api_request "$_pleskxml_tplt_add_txt_record" "$1" "$2" "$3"
|
_pleskxml_api_request "$_pleskxml_tplt_add_txt_record" "$1" "$2" "$3"
|
||||||
_pleskxml_retcode=$?
|
_pleskxml_retcode=$?
|
||||||
|
|
||||||
# $1 is the Plesk internal domain ID for the domain
|
# $1 is the Plesk internal domain ID for the domain
|
||||||
# $2 is the "host" entry within the domain, to add this to (eg '_acme_challenge')
|
# $2 is the "host" entry within the domain, to add this to (eg '_acme_challenge')
|
||||||
# $3 is the TXT record value
|
# $3 is the TXT record value
|
||||||
|
|
||||||
_DBG 2 'Returned from API request, now back in add_txt_record()'
|
_DBG 2 'Returned from API request, now back in add_txt_record()'
|
||||||
|
|
||||||
@ -781,9 +748,9 @@ _pleskxml_add_txt_record() {
|
|||||||
# SUCCESS! Remove the surrounding <result><id> tags and return the value!
|
# SUCCESS! Remove the surrounding <result><id> tags and return the value!
|
||||||
# (although we don't actually use it!
|
# (although we don't actually use it!
|
||||||
|
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed -E "s/^<result><id>([0-9]+)<\/id><\/result>$/\1/" \
|
| sed -E "s/^<result><id>([0-9]+)<\/id><\/result>$/\1/"
|
||||||
)"
|
)"
|
||||||
|
|
||||||
_DBG_VARDUMP 2 'SUCCESSFULLY exiting Plesk _pleskxml_add_txt_record'
|
_DBG_VARDUMP 2 'SUCCESSFULLY exiting Plesk _pleskxml_add_txt_record'
|
||||||
|
|
||||||
@ -799,7 +766,7 @@ _pleskxml_rmv_dns_record() {
|
|||||||
_pleskxml_api_request "$_pleskxml_tplt_rmv_dns_record" "$1"
|
_pleskxml_api_request "$_pleskxml_tplt_rmv_dns_record" "$1"
|
||||||
_pleskxml_retcode=$?
|
_pleskxml_retcode=$?
|
||||||
|
|
||||||
# $1 is the Plesk internal domain ID for the TXT record
|
# $1 is the Plesk internal domain ID for the TXT record
|
||||||
|
|
||||||
_DBG 2 'Returned from API request, now back in rmv_dns_record()'
|
_DBG 2 'Returned from API request, now back in rmv_dns_record()'
|
||||||
|
|
||||||
@ -816,22 +783,19 @@ _pleskxml_rmv_dns_record() {
|
|||||||
return 0
|
return 0
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
# 1st arg = domain ID
|
# 1st arg = domain ID
|
||||||
# 2nd arg = host that the record exists for
|
# 2nd arg = host that the record exists for
|
||||||
# 3rd arg = value of TXT record string to be found and removed
|
# 3rd arg = value of TXT record string to be found and removed
|
||||||
_pleskxml_rmv_txt_record() {
|
_pleskxml_rmv_txt_record() {
|
||||||
|
|
||||||
|
|
||||||
_DBG 2 "Entered Plesk _pleskxml_rmv_dns_TXT_record($*). Getting DNS TXT records for the domain ID"
|
_DBG 2 "Entered Plesk _pleskxml_rmv_dns_TXT_record($*). Getting DNS TXT records for the domain ID"
|
||||||
|
|
||||||
_pleskxml_get_dns_records "$1" 'TXT'
|
_pleskxml_get_dns_records "$1" 'TXT'
|
||||||
_pleskxml_retcode=$?
|
_pleskxml_retcode=$?
|
||||||
# $1 is the Plesk internal domain ID for the domain
|
# $1 is the Plesk internal domain ID for the domain
|
||||||
|
|
||||||
_DBG 2 'Returned from API request, now back in rmv_txt_record()'
|
_DBG 2 'Returned from API request, now back in rmv_txt_record()'
|
||||||
|
|
||||||
|
|
||||||
if [ $_pleskxml_retcode -ne 0 ] || [ "$_pleskxml_errors" != '' ] || [ "$_pleskxml_result" = '' ]; then
|
if [ $_pleskxml_retcode -ne 0 ] || [ "$_pleskxml_errors" != '' ] || [ "$_pleskxml_result" = '' ]; then
|
||||||
# Really, just testing return code should be enough, based on above code, but let's go "all-in" and test all variables returned
|
# Really, just testing return code should be enough, based on above code, but let's go "all-in" and test all variables returned
|
||||||
_DBG 2 "$_pleskxml_errors"
|
_DBG 2 "$_pleskxml_errors"
|
||||||
@ -844,15 +808,15 @@ _pleskxml_rmv_txt_record() {
|
|||||||
|
|
||||||
_DBG 2 "Filters to apply (as literal strings):${_pleskxml_newline}'<host>${2:-<NON_MATCHING_GARBAGE>}.'${_pleskxml_newline}'<value>${3:-<NON_MATCHING_GARBAGE>}</value>' "
|
_DBG 2 "Filters to apply (as literal strings):${_pleskxml_newline}'<host>${2:-<NON_MATCHING_GARBAGE>}.'${_pleskxml_newline}'<value>${3:-<NON_MATCHING_GARBAGE>}</value>' "
|
||||||
|
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
grep -F "<host>${2:-<NON_MATCHING_GARBAGE>}." | \
|
| grep -F "<host>${2:-<NON_MATCHING_GARBAGE>}." \
|
||||||
grep -F "<value>${3:-<NON_MATCHING_GARBAGE>}</value>" | \
|
| grep -F "<value>${3:-<NON_MATCHING_GARBAGE>}</value>" \
|
||||||
sed -E 's/(^[[:space:]]+|[[:space:]]+$)//g' | \
|
| sed -E 's/(^[[:space:]]+|[[:space:]]+$)//g' \
|
||||||
tr -d '\n' \
|
32m | tr -d '\n'
|
||||||
)"
|
)"
|
||||||
# Run 2 separate GREP filters, because the host and value order isn't mandatory in the API return data
|
# Run 2 separate GREP filters, because the host and value order isn't mandatory in the API return data
|
||||||
# ands this avoids regex and escaping which is easier
|
# ands this avoids regex and escaping which is easier
|
||||||
# NOTE: the returned "host" field is actually the FQDN, not just the host ID, hence the grep match on that field.
|
# NOTE: the returned "host" field is actually the FQDN, not just the host ID, hence the grep match on that field.
|
||||||
|
|
||||||
_DBG 2 "Filtered result:${_pleskxml_newline}'$_pleskxml_result' "
|
_DBG 2 "Filtered result:${_pleskxml_newline}'$_pleskxml_result' "
|
||||||
|
|
||||||
@ -873,9 +837,9 @@ _pleskxml_rmv_txt_record() {
|
|||||||
|
|
||||||
# If we get here, there was a single TXT record match, so we delete it.
|
# If we get here, there was a single TXT record match, so we delete it.
|
||||||
|
|
||||||
_pleskxml_result="$( printf '%s' "$_pleskxml_result" | \
|
_pleskxml_result="$(printf '%s' "$_pleskxml_result" \
|
||||||
sed -E 's/^.*<id>([0-9]+)<\/id>.*$/\1/' \
|
| sed -E 's/^.*<id>([0-9]+)<\/id>.*$/\1/'
|
||||||
)"
|
)"
|
||||||
|
|
||||||
_DBG 2 "A unique matching DNS TXT record was found, with Plesk record ID = '$_pleskxml_result'. Calling API to delete this record."
|
_DBG 2 "A unique matching DNS TXT record was found, with Plesk record ID = '$_pleskxml_result'. Calling API to delete this record."
|
||||||
|
|
||||||
@ -895,21 +859,19 @@ _pleskxml_rmv_txt_record() {
|
|||||||
return 0
|
return 0
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
exit
|
exit
|
||||||
|
|
||||||
# ---------------------- TEST CODE ------------------------------
|
# ---------------------- TEST CODE ------------------------------
|
||||||
|
|
||||||
|
|
||||||
# defined by user
|
# defined by user
|
||||||
pleskxml_uri="https://plesk.XXXXX.net:8443/enterprise/control/agent.php"
|
pleskxml_uri="https://plesk.XXXXX.net:8443/enterprise/control/agent.php"
|
||||||
pleskxml_user="XXXXX"
|
pleskxml_user="XXXXX"
|
||||||
pleskxml_pass="XXXXX"
|
pleskxml_pass="XXXXX"
|
||||||
pleskxml_debug_min_level=3
|
pleskxml_debug_min_level=3
|
||||||
|
|
||||||
# defined from args by module
|
# defined from args by module
|
||||||
_pleskxml_FQDN="_acme_challenge.XXXXX.com"
|
_pleskxml_FQDN="_acme_challenge.XXXXX.com"
|
||||||
_pleskxml_TXT_string='~test~string~'
|
_pleskxml_TXT_string='~test~string~'
|
||||||
|
|
||||||
printf '\n\n\n\n======================================================================== START OF RUN\n\n'
|
printf '\n\n\n\n======================================================================== START OF RUN\n\n'
|
||||||
|
|
||||||
@ -920,25 +882,25 @@ _DBG_EARLY_CHECK_MODE
|
|||||||
_DBG 3 'Debug mode done. Now testing _pleskxml_get_variables()'
|
_DBG 3 'Debug mode done. Now testing _pleskxml_get_variables()'
|
||||||
|
|
||||||
_pleskxml_get_variables
|
_pleskxml_get_variables
|
||||||
_DBG 3 "$( printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result" )"
|
_DBG 3 "$(printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result")"
|
||||||
|
|
||||||
_DBG 3 '==============================================================='
|
_DBG 3 '==============================================================='
|
||||||
|
|
||||||
_DBG 3 'Testing _pleskxml_get_domain_ID()'
|
_DBG 3 'Testing _pleskxml_get_domain_ID()'
|
||||||
_pleskxml_get_domain_ID "atticflat.uk"
|
_pleskxml_get_domain_ID "atticflat.uk"
|
||||||
|
|
||||||
_DBG 3 "$( printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result" )"
|
_DBG 3 "$(printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result")"
|
||||||
|
|
||||||
_DBG_VARDUMP 2
|
_DBG_VARDUMP 2
|
||||||
|
|
||||||
_DBG 3 '==============================================================='
|
_DBG 3 '==============================================================='
|
||||||
|
|
||||||
test_string="TEST STRING ADDED @ $( date )"
|
test_string="TEST STRING ADDED @ $(date)"
|
||||||
|
|
||||||
_DBG 3 "Testing add a TXT string: '$test_string' "
|
_DBG 3 "Testing add a TXT string: '$test_string' "
|
||||||
_pleskxml_add_txt_record 874 '_test_subdomain' "$test_string"
|
_pleskxml_add_txt_record 874 '_test_subdomain' "$test_string"
|
||||||
|
|
||||||
_DBG 3 "$( printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result" )"
|
_DBG 3 "$(printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result")"
|
||||||
|
|
||||||
_DBG_VARDUMP 2
|
_DBG_VARDUMP 2
|
||||||
|
|
||||||
@ -947,7 +909,7 @@ _DBG 3 '==============================================================='
|
|||||||
_DBG 3 'Testing get DNS records (ALL)'
|
_DBG 3 'Testing get DNS records (ALL)'
|
||||||
_pleskxml_get_dns_records 874
|
_pleskxml_get_dns_records 874
|
||||||
|
|
||||||
_DBG 3 "$( printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result" )"
|
_DBG 3 "$(printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result")"
|
||||||
|
|
||||||
_DBG_VARDUMP 2
|
_DBG_VARDUMP 2
|
||||||
|
|
||||||
@ -956,7 +918,7 @@ _DBG 3 '==============================================================='
|
|||||||
_DBG 3 'Testing get DNS records (TXT ONLY)'
|
_DBG 3 'Testing get DNS records (TXT ONLY)'
|
||||||
_pleskxml_get_dns_records 874 TXT
|
_pleskxml_get_dns_records 874 TXT
|
||||||
|
|
||||||
_DBG 3 "$( printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result" )"
|
_DBG 3 "$(printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result")"
|
||||||
|
|
||||||
_DBG_VARDUMP 2
|
_DBG_VARDUMP 2
|
||||||
|
|
||||||
@ -965,7 +927,7 @@ _DBG 3 '==============================================================='
|
|||||||
_DBG 3 'Testing rmv a TXT string'
|
_DBG 3 'Testing rmv a TXT string'
|
||||||
_pleskxml_rmv_txt_record 874 '_test_subdomain' "$test_string"
|
_pleskxml_rmv_txt_record 874 '_test_subdomain' "$test_string"
|
||||||
|
|
||||||
_DBG 3 "$( printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result" )"
|
_DBG 3 "$(printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result")"
|
||||||
|
|
||||||
_DBG_VARDUMP 2
|
_DBG_VARDUMP 2
|
||||||
|
|
||||||
@ -974,7 +936,7 @@ _DBG 3 '==============================================================='
|
|||||||
_DBG 3 'Re-testing get DNS records (TXT ONLY) after TXT string removal'
|
_DBG 3 'Re-testing get DNS records (TXT ONLY) after TXT string removal'
|
||||||
_pleskxml_get_dns_records 874 TXT
|
_pleskxml_get_dns_records 874 TXT
|
||||||
|
|
||||||
_DBG 3 "$( printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result" )"
|
_DBG 3 "$(printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result")"
|
||||||
|
|
||||||
_DBG_VARDUMP 2
|
_DBG_VARDUMP 2
|
||||||
|
|
||||||
@ -983,7 +945,7 @@ _DBG 3 '==============================================================='
|
|||||||
_DBG 3 'Testing rmv a TXT string, with a non-matching string'
|
_DBG 3 'Testing rmv a TXT string, with a non-matching string'
|
||||||
_pleskxml_rmv_txt_record 874 '_test_subdomain' 'JUNKegqw4bw4bb2'
|
_pleskxml_rmv_txt_record 874 '_test_subdomain' 'JUNKegqw4bw4bb2'
|
||||||
|
|
||||||
_DBG 3 "$( printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result" )"
|
_DBG 3 "$(printf 'RESULT:\n _pleskxml_errors: "%s"\n _pleskxml_retcode: "%s"\n _pleskxml_result: "%s"\n\n' "$_pleskxml_errors" "$_pleskxml_retcode" "$_pleskxml_result")"
|
||||||
|
|
||||||
_DBG_VARDUMP 2
|
_DBG_VARDUMP 2
|
||||||
|
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user